Solvent-Based Coatings
Indoc X3B
Solvent-based industrial coating for steel and plant maintenance.
- Use:
- Structural Steel, Plant & Machinery, Maintenance Repaint
- Pack sizes:
- 4 L · 20 L · 200 L
Flammable LiquidDG Class 3 · UN 1993 · PG II
Enamels
Code DEMO-QD150Demo recordQuick-Dry Enamel (Demo)
Demo catalogue record. Single-pack air-drying enamel intended for workshop finishing where fast handling and stacking times are required.
Recommended use
Single-pack finish coat over INDOC primers on fabricated steel.
Substrates
- Primed steel
- Previously enamelled surfaces
Pack sizes
1 L · 4 L · 20 L
Application notes
- Apply in thin even coats to avoid solvent entrapment.
- Handle after 1 hour; allow 24 hours before stacking.
Technical properties
- Type
- Single-pack enamel
- Finish
- Gloss
- Touch dry
- 20 minutes at 25°C
- Recoat
- Minimum 90 minutes
Hazard information & Safety Data Sheet
Flammable LiquidDG Class 3 · UN 1263 · PG III
- Product code
- DEMO-QD150
- SDS issue date
- 08 Nov 2023
- SDS version
- 1.0
- Signal word
- Danger
- UN number
- UN 1263
- Packing group
- III
- Flammable liquid and vapour.
- May cause drowsiness or dizziness.
If poisoning occurs contact the Poisons Information Centre on 13 11 26 for advice. In an emergency call 000.
SDS documents shown here are placeholders for rebuild review and must be replaced with current INDOC-issued SDS before launch.
Related products
X3B
Primers
INDOC Primer 120
General purpose steel primer for fabricated and structural steelwork.
- Use:
- Prime Steel, Structural Steel, Maintenance Repaint
- Pack sizes:
- 4 L · 10 L · 20 L · 200 L
Flammable LiquidDG Class 3
Epoxy Systems
Epoxy Barrier Coat (Demo)
Two-pack epoxy barrier build coat demo record for aggressive environments.
- Use:
- Structural Steel, Marine & Coastal, Plant & Machinery
- Pack sizes:
- 5 L kit · 15 L kit · 20 L kit
Skin Sensitiser / IrritantDemo record