Solvent-Based Coatings
Indoc X3B
Solvent-based industrial coating for steel and plant maintenance.
- Use:
- Structural Steel, Plant & Machinery, Maintenance Repaint
- Pack sizes:
- 4 L · 20 L · 200 L
Flammable LiquidDG Class 3 · UN 1993 · PG II
High Temperature
Code DEMO-HR800Demo recordHeat Resistant Coating (Demo)
Demo catalogue record. Silicone-based high temperature coating intended for exhausts, stacks and hot plant surfaces.
Recommended use
Protection of hot surfaces, exhausts and stacks operating up to 600°C.
Substrates
- Blasted steel
- Stainless steel
- Cast iron
Pack sizes
1 L · 4 L
Application notes
- Apply thin coats only — excessive film build will crack on heat cure.
- Heat cure required to develop full resistance.
Technical properties
- Type
- Silicone high temperature
- Service temperature
- Up to 600°C
- Dry film thickness
- 20–25 µm per coat
- Cure
- Heat cure at 200°C
Hazard information & Safety Data Sheet
Flammable LiquidDG Class 3 · UN 1263 · PG II
- Product code
- DEMO-HR800
- SDS issue date
- 14 Jul 2023
- SDS version
- 1.0
- Signal word
- Danger
- UN number
- UN 1263
- Packing group
- II
- Highly flammable liquid and vapour.
- May cause drowsiness or dizziness.
If poisoning occurs contact the Poisons Information Centre on 13 11 26 for advice. In an emergency call 000.
SDS documents shown here are placeholders for rebuild review and must be replaced with current INDOC-issued SDS before launch.
Related products
X3B
Epoxy Systems
Epoxy Barrier Coat (Demo)
Two-pack epoxy barrier build coat demo record for aggressive environments.
- Use:
- Structural Steel, Marine & Coastal, Plant & Machinery
- Pack sizes:
- 5 L kit · 15 L kit · 20 L kit
Skin Sensitiser / IrritantDemo record
Polyurethane
Polyurethane Topcoat (Demo)
Two-pack polyurethane finish demo record with high gloss and colour retention.
- Use:
- Structural Steel, Plant & Machinery, Marine & Coastal
- Pack sizes:
- 1 L kit · 5 L kit · 20 L kit
Flammable Liquid / Respiratory SensitiserDG Class 3 · UN 1263 · PG IIIDemo record